Shielded cable for instrument control cable and digital circuit inspection device_Control Cable_Products_Anhui Huahai Special Cable Group Co., Ltd.

Shielded cable for instrument control cable and digital circuit inspection device

First, product features and uses

This product is suitable for instrument control cable products with AC rated voltage of 450/750KV and below. The shielded cable of the circuit inspection device is shielded by copper-plastic composite film and copper wire braided shield. It has excellent anti-interference performance and is widely used in computer measurement and control devices.

Second, product implementation standards

Q/HHTZH008

Flame-retardant properties test implementation of GB/T12666-2008 standard

Third, the use of characteristics

1. AC rated voltage: U₀/U 450/750V

2. The maximum working temperature does not exceed 70°C.

3. The cable installation temperature should not be lower than 0°C.

4. the allowable bending radius of the cable: the minimum non-armored cable is 10 times the outer diameter of the cable; the copper tape shielded or steel tape armored cable is at least 12 times the outer diameter of the cable.

Fourth, the basic model and name

1. Instrument control cable

KJYVP	Polyethylene insulated PVC sheathed braided shielded instrument control cable
KJYVPR	Polyethylene insulated PVC sheathed braided shielded instrument control flexible cable
KJYVP₂	Polyethylene insulated PVC sheathed copper tape shielded instrument control cable
KJYVP₂R	Polyethylene insulated PVC sheathed copper tape shielded instrument control flexible cable
KJYVP₃	Polyethylene insulated PVC sheathed aluminum-plastic composite film shielding instrument control cable
KJYVPR₃R	Polyethylene insulated PVC sheathed aluminum-plastic composite film shielding instrument control flexible cable
KJVVP	PVC insulated PVC sheathed braided shielded instrument control cable
KJVVPR	Polyvinyl chloride insulated PVC sheathed braided shielded instrument control flexible cable
KJVVP₂	PVC insulated PVC sheathed copper tape shielded instrument control cable
KJVVP₂R	PVC insulated PVC sheathed copper tape shielded instrument control flexible cable
KJVVP₃	Polyvinyl chloride insulated PVC sheathed aluminum-plastic composite film shielding instrument control cable
KJVVP₃R	Polyvinyl chloride insulated PVC sheathed aluminum-plastic composite film shielding instrument control flexible cable

Note: The flame retardant cable is ZR in front of the model.

2. Shielded cable for digital circuit inspection device

KJCP	Shielded cable for digital circuit inspection device
KJCPR	Shielded flexible cable for digital circuit inspection device

V. Code name and meaning

project	Code	Description
Flame retardant properties	ZR	Grade A, B, C flame retardant
Serial code	KJ	Instrument control cable (digital patrol control cable)
Insulation Materials	V	Polyvinyl chloride, flame retardant PVC
	Y	Polyethylene
Jacket material	V	Polyvinyl chloride, flame retardant PVC
Shielding material	P	Copper wire braided shield
	P₁	Tinned copper wire shield
	P₂	Copper tape wrapped shield
	P₃	Aluminum plastic wrap shielding
Armored material	22	Steel tape armored PVC sheath
	23	Steel tape armored polyethylene sheath
	32	Steel wire armored PVC sheath
	33	Steel wire armored polyethylene sheath
Conductor structure	A	Single strand conductor
	B	7 stranded conductor
	R	Stranded conductor

Six. main technical indicators

1. The DC resistance of the finished cable conductor (in accordance with GB/T3956) refers to Appendix Table 3.

2. The insulation resistance is not less than 5000MΩ·km at 20°C, and the finished cable is subjected to AC 50Hz 2.0kV/5min voltage test without breakdown.

prev_page：Nitrile insulation and sheath control flexible cable

next_page：no more