First, product features and uses
This product uses silicone rubber as insulation or sheathing material. Because silicone rubber itself has the characteristics of high temperature resistance, cold resistance, softness, wear resistance and anti-corrosion, the cable has stable electrical properties under high temperature environment, good anti-aging performance and long service life. It is suitable for AC 1KV and below mobile transmission equipment such as driving, trolley, transmission machinery and other power transmission lines and control, lighting and communication lines. This product has been widely used in metallurgy and electric power. , chemical, ship, port and other industries.
The split-phase shielded silicone rubber sheathed flat cable is suitable for use as a power supply cable for the inverter.
Second, product implementation standards
Third, the use of characteristics
1, AC rated voltage:U0/U 0.6/1KV，Maximum working temperature: 180°C, minimum ambient temperature: fixed laying -60°C
2. The cable installation temperature should not be lower than -25°C.
Fourth, the basic model and name
Flat flexible cable for silicone rubber insulation and sheath movement
Nitrile insulated silicon rubber sheathed flat flexible cable for mobile
F46 insulated silicone rubber sheathed flat flexible cable
Silicone rubber insulated and sheathed tinned copper wire braided phase-shielded shielded flat flexible cable
Nitrile insulated silicon rubber sheathed tinned copper wire braided phase-shielded shielded flat flexible cable
F46 insulated silicon rubber sheathed tinned copper wire braided phase-shielded shielded flat flexible cable
Note: The copper wire in the conductor core can be tinned.
Five: code name and meaning
Silicone rubber insulation or sheath
Nitrile insulation or sheath
Copper wire (tinned copper wire) shielding
Six main technical indicators
1. The finished cable conductor (R type) DC resistance (in accordance with GB/T3956) refers to Table 2 of Appendix A.
2. The insulation resistance at 20°C is not less than 100 MΩ·KM.
3, the finished cable is subjected to AC 50Hz 3.5KV/5minThe voltage test does not break down.